THE FURY V2 POLYCARBONATE SQUONK | E-PHOENIX

106,61 €

The Fury V2 Polycarbonate is a high-end squonker box designed and manufactured in Switzerland by E-Phoenix. It has a new Mofset and a new Fire button.

More details

Warning: Last items in stock!

By buying this product you can collect up to 10 loyalty points. Your cart will total 10 loyalty points that can be converted into a voucher of 2,50 €.


The connectors are plated in 24 K gold for excellent conductivity with a 510 contact pin that is suitable for drippers with a diameter of 22 to 24 mm.

The Box Fury is equipped with a Mosfet: it is an integrated transistor that guarantees an optimum safety of the conductivity of the electric current and its stops in the event of a short circuit. This is a real added value for a small BF box.


Features:

Dimensions: 49x80x26mm.
Weight: 114g
Battery: 18650 (not supplied)
Support resistance value: 0.1Ω ~ 3Ω
E-Phoenix 7 ml black silicone bottle
Mosfet Transistor of E-Phoenix
Connector 510 in spring to adapt to all sprayers of the ride. Gold treatment for optimal conductivity.
Can be charged via micro-USB (cable not included)
Light indicator:

     On: the green LED flashes
     Off: purple LED light flashes
     Power button: Green LED on
     10 seconds of cut: Blue LED

Warning indicator:

     No atomizer was detected, resistance below 0.1 ohm or above 3 ohms, short circuit: the green LED flashes 5 times slowly
     Excessive temperature: the red LED flashes 5 times rapidly
     Battery power too low: the red LED flashes 3 times slowly
     During operation: battery power too low, short circuit: the red LED flashes rapidly

Load status indicator:

     The battery charge is less than 30%: the red LED flashes
     The battery charge is less than 70%: the blue LED flashes
     Battery power greater than 70%: green LED flashes
     Fully charged: constant green LED shown
Path: > > THE FURY V2 POLYCARBONATE SQUONK | E-PHOENIX
Valoraciones

30 other products in the same category: