Repairable Area

Handmade resistance in collaboration with Mono Vapeador and Microtube.

Ohmage: 0.28 in single coil

Diameter: 3mm

Thread: 4 turns of Ni80 and Ni90 with 8 threads and 3 cores

Without petardeo, superior flavor, ideal for RDA.

*WARNINGS IN DESCRIPTION

Artisanal resistance in collaboration with Microtube and mono Vapeador.

Thread: Full Ni80 (8 threads and 3 cores)

Diameter: 2.5mm

Ohmiaje: 0.30ohm in single

*WARNINGS IN DESCRIPTION

Artisanal resistance in collaboration with Microtube and mono Vapeador.

Thread: Ni80 90% Ni90 10% (8 threads and 3 cores)

Diameter: 3mm

Ohmiaje: 0.22ohm in single

*WARNINGS IN DESCRIPTION

Spare Pyrex glass for Vandy Vape RDTA V4 vaping atomizer.

Capacity: 5ml

This clamp is made of stainless steel and has a ceramic head that gives the opportunity to stabilize your resistances. Ceramics are capable of withstanding high temperatures and not causing a short circuit.

The ceramic clamp We Are Vape is the tool that must be fastened to ensure the absence of hot spots in assemblies.

The Twisted Messes Wire Nichrome 80 is a high-strength Twisted Messes. The cable can be used in wattage mode and temperature control mode. The Nichrome 80 series resistance cable consists of 20% chromium and 80% nickel.

Length: 75 meters

First "Alien Single Coil" of the JD brand, a different bet with a slightly higher ohmiaje than usual, which makes it a more exotic single, since performance and above all the taste will change the vaping experience.

Features:

0.42" Single Coil / 2.5mm / Mechanical & Electronic.

The Berserker v3 of Vandy Vape, is the new atomizer of the brand. Created with a new e liquid filling system, the new Bersker V3 MTL offers 24mm in diameter with a tank capacity of 2ml. Easy to install and disassemble, a perfect MTL for those who want to start in the world, since it allows you, with its three air flows, to be able to put the restriction to your liking.

Charro Coils NEO handcrafted resistors are primarily designed for BORO systems. The first model of the brand comes out with the collaboration of the already famous and well-known brand of handmade mods RAM MOD, another of Charro's single coil handmade resistances.

Diameter: 2.5mm / 5 turns

Thread: 100% Ni80

Ohmiaje approx: 0.43ohm

*Contains 2 units

The Dead Rabbit 3 RDA atomizer from Hellvape is a repairable dual coil dripping with four wide poles that allow the resistors to be installed quickly and easily, as well as a more dynamic airflow, a pool of greater capacity to prevent leaks, and various side air inlet holes for a personalized experience.

Boro city resistors will give you the best vaping sensation in your boros. With this coil you will feel the most extreme flavor accompanied by its peculiar roar. Are you ready?

Thread: Full Nichrome

Ohmiaje: 0.41 single coil

Diameter: 2.5mm

Suitable for mechanical and electronic

The mtl resistance of JD Coils is specially designed for MTL atomizers, offering all the flavor you are looking for with a fair steam production. It is made of 2 mm guide and offers a feeling similar to the analog puff and is suitable for nicotine salts.

Thread: Full Nichrome

Ohmiaje: 0.64 single coil

Diameter: 2mm

Suitable for mechanical and electronic

Sion Gm Mods & qp design Rda,present a collaboration between GM Mods and limited Qp Design designed for dual coil and with a diameter of 25 mm.

Made of steel, we find a dual coil RDA with exquisite finishes and almost unlimited customization the guys from Qp Design and GM Mods surprise us again with a device that will undoubtedly give a lot to talk about.

With a double air intake that directs the air blow directly to the resistors, a generous pool and a really comfortable pole system, this RDA goes a step further allowing us to change the aesthetic configuration of the perfect device to combine it with any of our mods

Bacterio Groot Single Coil 0.42ohm. Get the maximum flavor and hit your favorite liquids without giving up the nerve. The new Groot single coil, due to its small size, makes it compatible with both single coil and RTA rdas. These coils are mounted on 2.5mm guide with 4 turns that will give us a value of 0.42 ohms, manufactured in full nichrome 80 with twisted messes threads.

Bacterio Rocket Single Coil 0.30ohm. Put your device on fire! Rocket single coil very active response in a reduced size, which makes it compatible with both single coil rdas and RTA ́S.Designed to provide you with nerve and flavor in its 4 turns mounted on 2.5mm guide and a value of 0.30ohms. Made of full nichrome 80 with twisted messes threads.

Charro Coils SilverBlack D'Buril & Charro.Charro Coils presents its new creation in collaboration with D'Buril Mods, alien resistors for single coil small, in four turns and guide of 2.5mm. They are ideal resistors for atomizers of 22 and 23 mm single coil. With its reduced size and the low caliber of its threads, it manages to optimize the flavor to the maximum with a spectacular petardeo.

Guide: 2.5 mm

Material: N80

Value: 0.26 ohms (Single Coil)

Number of voltas: 4

Units: 2

Requiem Coils The Vaping Monkey, presents these new resistors perfectly designed and custom designed for the Requiem RDA atomizer as well as for the Requiem BF Kit.

Guide: 2.5 mm

Material: N80

Value: 0.26 ohms (Single Coil)

Number of laps: 4

Units: 2

Mad F*cking single coil is the variant of these resistors for single coil atomizers. Enjoy the same experience that this successful dual coil range provides, transferred to single atomizers. Mad F*cking is characterized by an exceptional flavor accompanied by its characteristic sound. You don't know them yet? tastes the purest taste on the market.

5 laps

2.5mm guide

0.26ohms single

White Wolf is the single coil model of the new brand, which after many... MANY tests, provides an incredible vaping sensation in virtually any atomizer that does not require a coil mtl on the market, from atomizers with very open draft to others with air restriction.

Its 0.25 ohms make it at a break-even point that grazes perfection.

Ohm: 0.25 single

Thread: 26/38 100% Twisted Messes N80

Guide: 2.5 mm

4 laps

Rampage are born from the idea of creating a very versatile model, which adapts to any dual coil, RDA, RTA or RDTA atomizer without any problem, being able to use them in atomizers from 28 mm to 23 mm with total guarantee that the performance will be optimal.

With its 0.14 ohms and its 2.5 mm construction it offers excellent performance and instant response.

Ohm: 0.14 in dual

Thread: 26/38 100% Twisted Messes N80

Guide: 2.5 mm

5 laps

Charrocoils, brings us its new and wide range of artisanal resistances for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisanal resistances for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisanal resistances for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisanal resistances for all tastes and types of vaping.