Reference: 00005652
The new Nuclear Ram from Charrocoils hit the table not because of the material, nor the threads used, but something simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market made on calibrated guide 2.25mm diameter.
Characteristics:
Guide: 2.25mm / 5 turns
Value: 0.12 ohms on dual coil
Materials: Full Nichrome 80
Chernobyl Coils and Rammod team up to create something NEW. Yes, new, it seems like a lie, right? You are right. We present you a coil in which we have put both our whole being and our experience in them to create coils that many will fall in love with.
The great novelty of these resistances is neither the material nor the wires used, but something simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market made on a 2.25mm diameter calibrated guide. . Many of you may think, but 0.25 is not much difference ... And you are right, it is not much difference about the 2.25mm mold but it is enough difference to completely change the vaping experience, the reactivity and the tactile it will return your buttons, since they have an instantaneous response. On the other hand, these resistors solve the problem that we had encountered when using resistors of 2.00mm in diameter and that is that it practically does not fit any cotton. Enough cotton enters these resistances to provide good drainage.
Also for assembly there is no problem because the 2.00 mm guide although it dances a little, can be used perfectly so that it does not deform when installing it in your favorite atomizer.
Perfect for the entire spectrum of dual coil atomizers, be they RTA, RDA or RDTA over 22mm.
The values of the resistors in the description are approximate depending on the device used.
It is advisable to use responsibly and stabilize the resistances in an electronic device beforehand.
Mesh "sheets" for the Geek Vape ZEUS X MicroMesh Sheet Coils contains a pair of Ni80 mesh heating elements that provide fast and even heating.
Contains 2 mesh sheets and 2 pieces of cotton.
Alien Dual Coil on 2.5mm guide. Manufactured in a mix of Ni90 and Ni80, its performance is a real savagery, you will not imagine that you are vaping at 0.13 ohms, instant, brutal vapor, do you have something to add?
Features:
0.13Ω Dual Coil / 2.5mm / Mechanical and Electronic.
Resistance pack MICRO FUSED CLAPTON MTL 10UDS PACK
Material: Ni80
Inner core: 30 * 2 GA
Outer wire: 42GA
Internal diameter: 2.5mm
Resistance: 0.88Ω in single coil
Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.
Chus Coil Resistors made by hand with USA materials, completely handmade and passed by ultrasonic cleaners.
3x26awg Kanthal
1x36awg Ni80
5 turns
Inside diameter: 3mm
0.30 Ohm. In single coil
Indicated for electronic Mods and 24 / 25mm atomizers
Includes: 2 resistors
Handmade resistance manufactured by the well-known Juan Montecoils.
Braiding system for Kanthal A1 repairable increases the flavor and vapor build your coils economically.
Features:
Alien coil of 4 turns and guided in 3mm, robust, with an ohm of 0.11 in dual coil provides great flavor and great clouds of vapor. Indicated for 24mm atomizers.
Features:
0.11Ω Dual Coil / 3mm / Mechanical and Electronic
The new Nuclear Ram from Charrocoils hit the table not because of the material, nor the threads used, but something simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market made on calibrated guide 2.25mm diameter.
Pods Systems | Coils 
Our eLiquids 
Starter Kits 
ALL Concentrates 
Nicotine Salts 
Alchemy | Bases & Boosted 
Rebuidables | Accesories .png){kind=small}
Wire | Handmade Coils 
Tanks | Coils 
Mod zone | Accessories 
High end