Handcrafted resistance manufactured by the well-known Juan Montecoils.
NUCLEAR RESISTANCES RAM CHERNOBYL COILS 0.12OHM 2PCS | CHARROCOILS
The new Nuclear Ram de Charrocoils strike the table not by the material, nor the threads used, but somewhat simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market manufactured on calibrated guide of 2.25mm in diameter.
Guide:2.25mm / 5 laps
Value:0.12 ohms in dual coil
Materials:Full Nichrome 80
Chernobyl Coils and Rammod team up to create something NEW. Yes, new, it sounds like a lie, doesn't it? Well, yes. We present to you a coil in which we have put both brands all our being and our experience in them to create coils that will fall in love with many.
The great novelty of these resistors is neither the material nor the threads used, but something simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market manufactured on a calibrated guide of 2.25mm in diameter. Many may think, but 0.25 is not much difference... And you're right, it's not much difference about the 2.25mm mold but it's the difference enough for it to completely change the vaping experience, reactivity and tactile that your pushbuttons are going to turn, as they have an instant response. On the other hand, these resistors solve the problem that we had encountered when using resistors 2.00mm in diameter and that is that practically no cotton fits. These resistors get enough cotton to provide good drainage.
In addition to the assembly there is no problem because the 2.00 mm guide although it dances a little, can be used perfectly so that it does not deform when installed on your favorite atomizer.
Perfect for the entire spectrum of dual coil atomizers, whether RTA, RDA or RDTA over 22mm.
The resistance values in the description are approximate depending on the device being used.
Responsible use and stabilize resistors in a pre-electronic device is advised.
8 other products in the same category:
Handmade Chus Coil resistors with made-in USA materials, completely handcrafted and passed by ultrasonic cleaners.
Inner diameter: 3mm
0.20 Ohm. in single coil
indicated for mechanical mods (EXPERT USERS ONLY!)
Includes: 2 resistors
Tricore Alien: A resistance with very good steam production accompanied by the best possible flavor, ideal for RDA and RDTA.
Devils Work is the result of a close collaboration between Bacterio Coils and Mr.Yum. Resistances with a devilish nerve! They will squeeze the batteries to the maximum providing an intense flavor to your favorite liquids. Bacterio Coils, one of the endurance brands with the greatest variety of products, designs different experiences so you can create your own vaping style.
- Single 22 0.37ohm: Resistance designed for a quiet vaping, has a relatively high ohmiaje. Perfect for squeezing the taste of liquids to the maximum. Recommended for 22mm atomizers.
It is built with three 28ga cores and a 38ga claptomized, all 100% Nichrome80 kidney PUNCHER, in 6 laps in 2.5mm guide. 0.37 Ohms.
- 2x Resistors
- 1x Wrap CharroCoils 18650
LADY THEMIS (ALIEN +-0.28 ohms) *electronic/mechanical use
Type: Alien Full Nichrome 80/20.
5 laps on 2.5mm guide
- 0.28 ohms single with 5 laps
- 0.25 ohms single with 4 laps.
Demon Killer brings us its new raging Coil pre-manufactured resistors, built with N80 and designed for the most demanding vapers.
Diameter: 3.0 mm
Best working power: 40-90W
B 0.3mm+ (0.08mm*48) 0.25ohm
If you are one of those who fell in love with the Mad f*cking coils in 2.5mm guide, with the mad f*cking redux in 3mm guide we wanted to go one step further.