The Crown is designed for dual coil thanks to its 0.17 ohm value, it is perfect for those who want to vape in any type of atomizer, but who want to enjoy more of a good flavor and performance than a huge vapor.

Their 2.5mm guide makes them ideal for single-battery mods without compromising performance and offers an optimal vaping experience.

You could even use them on dual 22mm atomizers!

With its 0.14 ohm and 2.5mm construction it offers excellent performance and instant response.

- Ohm: 0.17 in dual

- Thread: 27/38 100% Twisted Messes N80

- Guide: 2.5 mm

- 5 laps

White Wolf is the single coil model of the new brand, which after many ... LOTS of tests, provides an incredible vaping sensation in practically any atomizer that does not require an mtl coil on the market, from atomizers with very open puff to others with restriction of air.

Its 0.25 ohms make it reach a point of balance that borders on perfection.

- Ohm: 0.25 in single

- Thread: 26/38 100% Twisted Messes N80

- Guide: 2.5 mm

- 4 laps

Rampage were born from the idea of creating a very versatile model, which adapts to any dual coil, RDA, RTA or RDTA atomizer without any problem, being able to use them in atomizers from 28 mm to 23 mm with a total guarantee that the performance goes to be optimal.

With its 0.14 ohm and 2.5mm construction it offers excellent performance and instant response.

- Ohm: 0.14 in dual

- Thread: 26/38 100% Twisted Messes N80

- Guide: 2.5 mm

- 5 laps

First “Alien Single Coil” by the JD brand, a different bet with a slightly higher ohm than usual, which makes it a more exotic single, since the performance and especially the flavor will change your experience of vaping.

Features:

0.42Ω Single Coil / 2.5mm / Mechanical and Electronic.

Alien coil of 4 turns and guided in 3mm, robust, with an ohm of 0.11 in dual coil provides great flavor and great clouds of vapor. Indicated for 24mm atomizers.

Features:

0.11Ω Dual Coil / 3mm / Mechanical and Electronic

Alien Single Coil for demanding vaping, the 0.29 ohm gives spectacular power, an aggressive backfire, but always with a touch of subtlety. The great flavor is another of the strengths of this beachy coil model in 2.5mm guide.

Features:

0.29Ω Single Coil / 2.5mm / Mechanical and Electronic

Alien Dual Coil on 2.5mm guide. Manufactured in a mix of Ni90 and Ni80, its performance is a real savagery, you will not imagine that you are vaping at 0.13 ohms, instant, brutal vapor, do you have something to add?

Features:

0.13Ω Dual Coil / 2.5mm / Mechanical and Electronic.

This new line of quality wires are the same with our popular prebuilt coil series wires. With the prebuilt coil series getting tons of positive feedback, demand of the wires keeps rising among vapers who prefer to wrap coils all by themselves. 

N80

Inner Core: 28Gx2

Outer Core: 38G

Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.

Charrocoils, brings us its new and wide range of artisan coils for all tastes and types of vaping.

The new Nuclear Ram from Charrocoils hit the table not because of the material, nor the threads used, but something simpler, more "normal" but that makes an abysmal difference: We present the first coils on the market made on calibrated guide 2.25mm diameter.

Single 22 0.37ohm: Resistance thought for a quiet vaping, it has a relatively high ohm. Perfect for squeezing the flavor of liquids to the maximum. Recommended for 22mm atomizers.

It is built with three 28ga cores and a 38ga claptomized, all 100% Nichrome80 from KIDNEY PUNCHER, in 6 turns in 2.5mm guide. 0.37 Ohms.

The packaging includes:

2x resistors
1x CharroCoils 18650 Wrap

Mesh "sheets" for the Geek Vape ZEUS X MicroMesh Sheet Coils contains a pair of Ni80 mesh heating elements that provide fast and even heating.

Contains 2 mesh sheets and 2 pieces of cotton.

New Nairobi Lady Coils, some coils with tons of character if you like the reactivity and the backfiring. Stand by the flavor that they give to your liquids.

For use in Single or Dual (Recommended Single)

• 0.30 ohm in single approx.
• 5 laps Full Ni80
• Guide 2.5 mm

Pack of 10 resistors alien with three cores (0.3 mm rolled by 0.12 mm) with an internal diameter of 3 mm for a unit value of 0.3 Ω

Pack of 10 resistors alien with three cores (0.4 mm rolled by 0.12 mm) with an internal diameter of 3 mm for a unit value of 0.22 Ω

Pack of 10 resistors clapton merged with two cores (0.4 mm rolled by 0.12 mm) with an internal diameter of 3 mm for a unit value of 0.28 Ω.

Three threads 26G nichrome80 wrapped 38G nichrome80 with four turns, give a spectacular performance without neglecting the characteristic flavor of the Alien. Two seconds is what it takes these resistances to give all the necessary power. Since the battery is practically fast, it does not get hot or stressed.

0.08ohm Dual Coil // 0.16 ohm Single Coil

Remake of the Black Edition! New resistance model to give a new look to the range. A single coil of 0.20 in 3mm n80 focused on the highest possible performance. High response without a low ohmniaje without leaving behind the taste. Perfect for 24mm single coil atomizers and 22mm single coil atomizers with ample air intake.

0.20 ohm Single Coil

Designed for mechanical mod. Thought of a good performance and high response improving the taste. They have three 26G threads inside nichrome80 and wrapped in Alien with 38G of nichrome80. Mounted in 3mm to increase cotton capacity.

0.12 ohm Dual Coil // 0.24 ohm Single Coil

Unique and unrepeatable these Alien will give a lot of life to your batteries. TMF Coil is a collaboration with The Mind Flayer. By generating little mass they offer a more active response. Mounted on a 2.5 mm guide are Alien with 2 cores that extend the autonomy of your batteries.

Devils Work is the result of a close collaboration between Bacterio Coils and Mr. Yum. Resistors with a devilish nerve! They will squeeze the batteries to the fullest, providing an intense flavor to your favorite liquids. Bacterio Coils, one of the resistance brands with the greatest variety of products, designs different experiences so you can create your own vaping style.

Handmade resistance manufactured by the well-known Juan Montecoils.

Handmade resistance manufactured by the well-known Juan Montecoils.

Handmade resistance manufactured by the well-known Juan Montecoils.

LADY THEMIS (ALIEN + -0.28 ohms) * use electronic / mechanical
Type: Alien Full Nichrome 80/20.
5 turns on 2.5mm guide
Approx value:
0.28 ohms single with 5 turns
0.25 ohms single with 4 turns.

CHAMAFLEJAS (MICRO FUSED + - 0.82 ohms) * suitable with electronic devices for greater safety

Recommended for repairable 19mm or 22mm atos

Craft resistance with US Premium threads and treated with ultrasound.

- Type: Alien Full Nichrome 80/20.

- 7 turns on 2.5mm guide

- QUEEN LADY (MICRO ALIEN + - 0.85 ohms) * suitable electronic with electronic for greater security

Recommended for repairable 19mm or 22mm atos

Craft resistance with US Premium threads and treated with ultrasound.

-Type: Alien Full Nichrome 80/20.

-7 turns on 2.5mm guide

Nickel Chrome 80/20 (Ni80) electrical wire, is a very popular choice in the vaping industry due to its high heat and electrical resistance. This also means it is an ideal wire choice for cloud chasers as the thinner gauges used to wrap builds, such as Claptons, have a very high resistance.

Length: 10 metres.

Nickel Chrome 80/20 (Ni80) electrical wire, is a very popular choice in the vaping industry due to its high heat and electrical resistance. This also means it is an ideal wire choice for cloud chasers as the thinner gauges used to wrap builds, such as Claptons, have a very high resistance.

Length: 10 metres.

Nickel Chrome 80/20 (Ni80) electrical wire, is a very popular choice in the vaping industry due to its high heat and electrical resistance. This also means it is an ideal wire choice for cloud chasers as the thinner gauges used to wrap builds, such as Claptons, have a very high resistance.

Length: 10 metres.

KA1 electrical wire (FeCrAl A1) has high resistivity, good oxidisation resistance and the ability to withstand very high temperatures.

Length: 10 metres.

KA1 electrical wire (FeCrAl A1) has high resistivity, good oxidisation resistance and the ability to withstand very high temperatures.

Length: 10 metres.

Bacterium Coils Silk Coil MTL Resistance is a resistance specifically manufactured for flavor-focused atomizers with high ohm resistors. Its use is intended for hard inhalations, more similar to analog.

Features:

They provide a great taste
6 turns in 2.5 mm mold
0.84 ohm resistance on both models
To use a single resistor

Lvs Easy Coils cotton is a high quality absorbent material for coil construction consisting of N80 / N90. It is the best option for DIY lovers and adopts 100% organic cotton to present a purer taste. 20 pieces per package.

Resistance Value:

N80, 0.3ohm 26GAx2 + 38GA

COMPETITION THREAD RESISTORS NI80

Competition ni80 0,40MM / 26GA Cable Ni80 20 feet / Wotofo reel

COMPETITION THREAD RESISTORS NI80

Competition ni80 0.12mm / 36GA Cable Ni80 300 feet / Wotofo reel

THREAD FOR RESISTORS WOTOFO DUAL CORE FUSED CLAPTON

Tri Core Fused Clapton (26GA * 2 + 36GA) 20 ft Ni80 Cable / Wotofo Reel

Handmade resistance manufactured by CHUS COILS.

(DUAL ALIEN + -0.18 / 0.36 ohms) * Preferable use mechanical / electronic fit.

• Type: Alien Full Nichrome 80/20.
• 5 turns on 3mm guide
• Approx value: 0.18 ohms in dual coil and 0.36 in single.

Chernobyl Coils was born as a new brand of artisanal resistances by Charro Coils and Chernobyl Mods. Our concept of resistance is that of coils designed to have optimal performance and offer the vaper the best possible vaping experience.

Handmade resistance manufactured by the well-known Juan Montecoils.

Handmade resistance manufactured by the well-known Juan Montecoils.

Handmade resistance manufactured by the well-known Juan Montecoils.

RESISTENCE WIRE WOTOFO FRAMED STAPLE CLAPTON

Reel 6m wire Ni80-style Frame Staple clapton (9 strands of 0.1 mm between 2 strands of 0.3 mm is wrapped with 0.12 mm)

Resistance pack MICRO FUSED CLAPTON MTL 10UDS PACK

Material: Ni80

Inner core: 30 * 2 GA

Outer wire: 42GA

Internal diameter: 2.5mm

Resistance: 0.88Ω in single coil

Resistance pack ALIEN CLAPTON PACK 2UDS

Material: Ni80

Internal core: 28 * 3 GA

Outside cable: 38GA

Internal diameter: 3.0mm

Resistance: 0.30Ω in single coil

Handmade with Twisted Messesre wire

Tricore Alien: A resistance with very good steam production accompanied by the best possible flavor, ideal for RDA and RDTA.

Tricore Alien: The most versatile of all ranges. It works perfectly in large RTAs, in RDTAs and in RDAs. It is designed for a large production of steam with a spectacular taste.

The Resistance Mad F*cking coil  by Bacterio Coils is a very high performance resistance.

Features:

They provide great flavor
5 turns in 2.5 mm mold
In single 0.26 ohm, dual 0.13 ohm
Use in electronic and mechanical mod
Specially designed for BF

Wotofo Framed Staple Clapton Ni80 3mm 0.33 ohm, pack of 10 resistors

Features:

Material: N80
Internal core: 28GA + 38gax9 + 28GA
External cable: 36GA
Internal diameter: 3 mm
Resistance: 0.33 ohm
10 units

Wire roll Fused Clapton special for MTL. For use in sprayers such as Kayfun Prime or Kayfun Mini V3 for excellent MTL vaping in lower power ranges. This version is only compatible with the variable voltage mode.

SS316L 30ga x 2 + 38ga - Aprox 2.37Ω per foot.

Chus Coil resistances made by hand with materials made in the USA, completely handmade and passed by ultrasonic cleaners.

• Alien of two cores KA and NI80
• 6 turns in 3mm guide and gives a value of 0.27 ohms in dual coil.
• Specially designed for RTA (tanks) from 22mm to 25mm. And for electronic mod.
• indicated for electronic mods (ONLY EXPERT USERS!)

This reconstructable mesh sheet is a larger one that has proven to be superior in flavor production on the market. It is a sheet perforated in Kanthal A1 material. The style mesh roll sheet measures 16mm * 6.8mm with a resistance of 0.18 ohms for better performance from 40 to 60w. The dry start power of the appropriate mesh coil is between 15W and 20W.

WOTOFO resistor pair.
26G * 4 + 36G

WOTOFO resistor pair.
26G * 3 + 38G

Wire roll Fused Clapton special for MTL. For use in sprayers such as Kayfun Prime or Kayfun Mini V3 for excellent MTL vaping in lower power ranges. This version is only compatible with the variable voltage mode.

Kanthal 30ga x 2 + 38ga - Aprox 2.37Ω per foot.

Wire roll Fused Clapton special for MTL. For use in sprayers such as Kayfun Prime or Kayfun Mini V3 for excellent MTL vaping in lower power ranges. This version is only compatible with the variable voltage mode.

Ni80 30ga x 2 + 38ga - Approx 3.5Ω per foot.

MINI ALIEN 0.14 / 0.28 ohms (suitable mechanics / electronics)

* Recommended for BF

• Handmade resistance with premium yarns from the USA and treated with ultrasound.
• Type: ALIEN Full Nichrome 80/20.
• 4 turns on 3mm guide
• Value approx .; 0.14 ohms in dual coil and 0.28 in single

ALIEN FULL NI80 0.09 / 0.18 (FOR EXPERTS ONLY)

• Handmade resistance with premium yarns from the USA and treated with ultrasound.
• Type: ALIEN Full Nichrome 80/20.
• 4 turns on 3mm guide
• Value approx .; 0.09 ohms in dual coil and 0.18 in single

(FRAMED STAPLE ALIEN 0.16 ohms SINGLE)

Recommended for mechanics and electronics

• Handmade resistance with premium yarns from the USA and treated with ultrasound.
• Type: Framed Staple Alien. Core including flat and round threads. Wrapped in Alien. Full Nichrome 80/20.
• 5 turns on 3mm guide
• Value approx .; 0.16 ohms in single coil

Recommended devices: Resistors specially designed for electronic devices and focused on taste.

Guide: 3mm 7 turns

Value: 0.20 ohms in Dual Coil

Materials: Full Nichrome 2x26 / 40 awg

* If you wish we can modify the legs of the resistances so that they adapt to any atomizer. Leave us a comment when you go to place your order.

A pack of sample coils from the well renowned Coilology company, with various different coil styles to appeal to all vapers.

Chus Coil Resistors made by hand with USA materials, completely handmade and passed by ultrasonic cleaners.

     3x26awg Ni80

     1x36awg Ni80

     5 turns

     Inside diameter: 3mm

     0.20 Ohm. In single coil

     Indicated for mechanical mods (ONLY EXPERT USERS!)

Includes: 2 coils

Chus Coil resistances made by hand with USA materials, completely handmade and passed by ultrasonic cleaners.

     3x26awg Ni80

     1x36awg Ni80

     4 laps

     Inner diameter: 2.5mm

     0.16 Ohm. in single coil

     indicated for mechanical mods (ONLY EXPERT USERS!)

Includes: 2 coils

Chus Coil resistances made by hand with USA materials, completely handmade and passed by ultrasonic cleaners.

     2x26awg Ni80

     1x36awg Ni80

     5 laps

     Inner diameter: 3mm

     0.28 Ohm. in single coil

     indicated for mechanical mods BF (Squonker Mod)

Includes: 2 coils

High quality threads from the Vandy Vape brand, manufactured in SS316L.

SUPERFINE MTL FUSED CLAPTON SS316L 0.25MM / 30GA X2 + 0.10MM / 38GA

Length: 3 meters

High quality threads of the Vandy Vape brand, manufactured in Nichrone.

     SS316L/28ga*2(=)+30ga 1Ω/ft

     Length: 3 meters

High quality threads of the Vandy Vape brand, manufactured in Kanthaal A1.

     KA1/28ga*2(=)+32ga 10ft 1.77Ω/ft

     Length: 3 meters

Powered by a single 18650 battery, the SMOK Priv V8 Kit features max 60W output, big fire key, dual LED indicators and portable size. The Kit also comes with a 3ml TFV8 Baby tank. 15 colors.

High quality threads of the Vandy Vape brand, manufactured in Nichrone.

Ni80/28ga x2(=)+35ga 10ft 2.35Ω/ft

Length: 3 meters

Chus Coil resistances made by hand with materials made in the USA, completely handmade and passed by ultrasonic cleaners.

     4x0,4awg ribbon NI80

     2x28awg NI80

     1x36awg NI80

     5 laps

     Inner diameter: 3mm

     0.25 Ohm. in single coil

     Indicated for Mechanical Mods

     Included 2 coils

Vandy Vape SS316L Wire The Vandy Vape SS316L Wire is a Vandy Vape resistance wire for RBA / RTA / RDA atomizers. A good choice for the DIY.

Length: 10 meters

Vandy Vape Ni80 Wires The Vandy Vape Ni80 Wires is a Vandy Vape resistance wire for RBA / RTA / RDA atomizers. The wire is made of Nichrome 80 Ni80, a good choice for DIY.

Length: 10 meters

Vandy Vape Kanthal A1 Wires The Vandy Vape Kanthal A1 Wires is a Vandy Vape resistance wire for RBA / RTA / RDA atomizers. A good choice for the DIY.

Kanthal A1 AWG26 - Approx 3.45Ω per foot
Kanthal A1 AWG24 - Approx 2.2Ω per foot

Our Ni80 cables are soft, easy to handle and cut. Chromium nickel 80/20 is commonly used as a heat treatment wire. In these times it has found popularity in the vaping industry due to its high level of heat and electrical resistance. This nickel-chromium alloy is very suitable for applications that are subject to oxidation.

     Length: 10 meters

     Material: Ni80 Cr20

SS316L is the low carbon version of SS316 grade stainless steel.
This cable is in our stock for use in the mesh fabric. The SS316 grade is the industry standard grade of stainless steel for use in the marine, food and medical industries.

Length: 10 meters

Material: SS316L